水平垂直法阻燃性能測定儀是由北京北廣精儀儀器設備有限公司（北京生產儀器設備廠家）按照國標GB1210-92 （符合：GB/T2408-1996、GB5455-85、GB2408-80、GB4609-84）精密生產，儀器質量好，價格比經銷商便宜很多，無可挑剔。

產品名稱有：水平垂直法阻燃性能測定儀，水平垂直燃燒測試儀，塑料水平垂直燃燒性能試驗儀，水平垂直燃燒性能試驗儀

一、本儀器技術指標：

1、生燈施加火焰時間有10s、12s、30s可選擇，精度±0.2s，倒記時，撤退報警提醒。

2、本生燈內徑：9.5mm±0.3mm

3、本生燈可在0-450范圍內傾斜

4、本生燈藍色火焰高度：15mm-45mm可任意調節，配有火焰高度標尺

5、試樣夾zui大夾指厚度：≤13mm

6、試樣夾垂直方向調整距離：≤100mm    

7、試樣夾水平方向調整距離：≤70mm

8、水平試樣夾可900收放

9、可燃氣源：甲烷、天然氣、液化石油氣、煤氣 

二、塑料試樣指標：

1、 電子點火，點火距試樣距離：150mm，藍色火焰高度：20mm±2mm；

2、 燃燒試驗空間大于0.5立方米；

3、 燃燒器自動定時定位；

4、 施焰時間：0～99.99秒任意設置；

5、 有焰燃燒，無焰燃燒時間均自動記錄，數碼顯示；

6、 火焰高度可調整，并可配置火焰溫度測量裝置；

7、 配有可燃氣體泄露報警裝置；

8、 試樣尺寸：長125mm±5mm；寬13.0mm±0.3mm；厚3.0mm±0.2mm；

三：技術標準：

本試驗儀適用于檢驗和評定塑料材料的燃燒特性，是根據IEC60695-11-4、IEC60695-11-10、IEC60695-11-3,IEC60695-11-20、IEC60695-11-2。美國 UL94 標準《設備和器具部件用塑料材料的可燃性試驗》中規定的有關條款。采用積分式進氣點火系統，燃燒延時僅0.1秒，確保氣體的充分燃燒時間；黑色背景，多功能火焰量規，火焰調節工作變得簡單；箱體全不銹鋼，觀察窗口大；進口高精度數顯儀表，外形美觀；集多項國內外同類產品的優點，性能穩定，操作方便。

Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.

Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level

Index, the instrument technology:

1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.

2, the Bunsen burner diameter: 9.5mm ± 0.3mm

3, the Bunsen burner tilting in the range of 0-450

4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale

5, the sample holder maximum finger thickness: ≤ 13mm

6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm

7, the sample holder horizontal distance adjustment: ≤ 70mm

8, the level of the sample holder can be 900 and

9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas

Two, the plastic sample index:

1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;

2, the combustion test space of more than 0.5 cubic meters;

3, the burner automatic timing and positioning;

4, the flame time: 0 ~ 99.99 seconds set arbitrarily;

5, flaming, flameless combustion time are recorded automatically, digital display;

6, the flame height can be adjusted, and configure a flame temperature measuring device;

7, with a combustible gas leakage alarm device;

8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;

Three: technical standard:

The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.

The main purpose of this instrument, four:

Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.

Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.

Principle five, the instrument:

One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.

Six, as long as the terms:

1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.

2, Yu Yan: afterflame time duration.

3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.

4, the afterglow time: afterglow duration.

Additional introduction about the instrument:

What is the vertical combustion method? （horizontal burning test）

Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.

Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）

Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）

Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.

Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.

Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level

Index, the instrument technology:

1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.

2, the Bunsen burner diameter: 9.5mm ± 0.3mm

3, the Bunsen burner tilting in the range of 0-450

4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale

5, the sample holder maximum finger thickness: ≤ 13mm

6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm

7, the sample holder horizontal distance adjustment: ≤ 70mm

8, the level of the sample holder can be 900 and

9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas

Two, the plastic sample index:

1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;

2, the combustion test space of more than 0.5 cubic meters;

3, the burner automatic timing and positioning;

4, the flame time: 0 ~ 99.99 seconds set arbitrarily;

5, flaming, flameless combustion time are recorded automatically, digital display;

6, the flame height can be adjusted, and configure a flame temperature measuring device;

7, with a combustible gas leakage alarm device;

8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;

Three: technical standard:

The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.

The main purpose of this instrument, four:

Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.

Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.

Principle five, the instrument:

One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.

Six, as long as the terms:

1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.

2, Yu Yan: afterflame time duration.

3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.

4, the afterglow time: afterglow duration.

Additional introduction about the instrument:

What is the vertical combustion method? （horizontal burning test）

Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.

Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）

Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）

Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.

Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.

Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level

Index, the instrument technology:

1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.

2, the Bunsen burner diameter: 9.5mm ± 0.3mm

3, the Bunsen burner tilting in the range of 0-450

4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale

5, the sample holder maximum finger thickness: ≤ 13mm

6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm

7, the sample holder horizontal distance adjustment: ≤ 70mm

8, the level of the sample holder can be 900 and

9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas

Two, the plastic sample index:

1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;

2, the combustion test space of more than 0.5 cubic meters;

3, the burner automatic timing and positioning;

4, the flame time: 0 ~ 99.99 seconds set arbitrarily;

5, flaming, flameless combustion time are recorded automatically, digital display;

6, the flame height can be adjusted, and configure a flame temperature measuring device;

7, with a combustible gas leakage alarm device;

8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;

Three: technical standard:

The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.

The main purpose of this instrument, four:

Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.

Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.

Principle five, the instrument:

One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.

Six, as long as the terms:

1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.

2, Yu Yan: afterflame time duration.

3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.

4, the afterglow time: afterglow duration.

Additional introduction about the instrument:

What is the vertical combustion method? （horizontal burning test）

Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.

Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）

Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）

Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.

Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.

Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level

Index, the instrument technology:

1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.

2, the Bunsen burner diameter: 9.5mm ± 0.3mm

3, the Bunsen burner tilting in the range of 0-450

4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale

5, the sample holder maximum finger thickness: ≤ 13mm

6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm

7, the sample holder horizontal distance adjustment: ≤ 70mm

8, the level of the sample holder can be 900 and

9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas

Two, the plastic sample index:

1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;

2, the combustion test space of more than 0.5 cubic meters;

3, the burner automatic timing and positioning;

4, the flame time: 0 ~ 99.99 seconds set arbitrarily;

5, flaming, flameless combustion time are recorded automatically, digital display;

6, the flame height can be adjusted, and configure a flame temperature measuring device;

7, with a combustible gas leakage alarm device;

8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;

Three: technical standard:

The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.

The main purpose of this instrument, four:

Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.

Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.

Principle five, the instrument:

One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.

Six, as long as the terms:

1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.

2, Yu Yan: afterflame time duration.

3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.

4, the afterglow time: afterglow duration.

Additional introduction about the instrument:

What is the vertical combustion method? （horizontal burning test）

Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.

Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）

Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）

Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.

Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.

Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level

Index, the instrument technology:

1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.

2, the Bunsen burner diameter: 9.5mm ± 0.3mm

3, the Bunsen burner tilting in the range of 0-450

4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale

5, the sample holder maximum finger thickness: ≤ 13mm

6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm

7, the sample holder horizontal distance adjustment: ≤ 70mm

8, the level of the sample holder can be 900 and

9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas

Two, the plastic sample index:

1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;

2, the combustion test space of more than 0.5 cubic meters;

3, the burner automatic timing and positioning;

4, the flame time: 0 ~ 99.99 seconds set arbitrarily;

5, flaming, flameless combustion time are recorded automatically, digital display;

6, the flame height can be adjusted, and configure a flame temperature measuring device;

7, with a combustible gas leakage alarm device;

8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;

Three: technical standard:

The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.

The main purpose of this instrument, four:

Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.

Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.

Principle five, the instrument:

One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.

Six, as long as the terms:

1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.

2, Yu Yan: afterflame time duration.

3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.

4, the afterglow time: afterglow duration.

Additional introduction about the instrument:

What is the vertical combustion method? （horizontal burning test）

Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.

Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）

Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）

Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.

Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.

Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level

Index, the instrument technology:

1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.

2, the Bunsen burner diameter: 9.5mm ± 0.3mm

3, the Bunsen burner tilting in the range of 0-450

4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale

5, the sample holder maximum finger thickness: ≤ 13mm

6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm

7, the sample holder horizontal distance adjustment: ≤ 70mm

8, the level of the sample holder can be 900 and

9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas

Two, the plastic sample index:

1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;

2, the combustion test space of more than 0.5 cubic meters;

3, the burner automatic timing and positioning;

4, the flame time: 0 ~ 99.99 seconds set arbitrarily;

5, flaming, flameless combustion time are recorded automatically, digital display;

6, the flame height can be adjusted, and configure a flame temperature measuring device;

7, with a combustible gas leakage alarm device;

8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;

Three: technical standard:

The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.

The main purpose of this instrument, four:

Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.

Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.

Principle five, the instrument:

One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.

Six, as long as the terms:

1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.

2, Yu Yan: afterflame time duration.

3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.

4, the afterglow time: afterglow duration.

Additional introduction about the instrument:

What is the vertical combustion method? （horizontal burning test）

Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.

Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）

Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）

Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.

Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.

Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level

Index, the instrument technology:

1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.

2, the Bunsen burner diameter: 9.5mm ± 0.3mm

3, the Bunsen burner tilting in the range of 0-450

4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale

5, the sample holder maximum finger thickness: ≤ 13mm

6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm

7, the sample holder horizontal distance adjustment: ≤ 70mm

8, the level of the sample holder can be 900 and

9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas

Two, the plastic sample index:

1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;

2, the combustion test space of more than 0.5 cubic meters;

3, the burner automatic timing and positioning;

4, the flame time: 0 ~ 99.99 seconds set arbitrarily;

5, flaming, flameless combustion time are recorded automatically, digital display;

6, the flame height can be adjusted, and configure a flame temperature measuring device;

7, with a combustible gas leakage alarm device;

8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;

Three: technical standard:

The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.

The main purpose of this instrument, four:

Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.

Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.

Principle five, the instrument:

One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.

Six, as long as the terms:

1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.

2, Yu Yan: afterflame time duration.

3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.

4, the afterglow time: afterglow duration.

Additional introduction about the instrument:

What is the vertical combustion method? （horizontal burning test）

Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.

Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）

Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）

Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.

Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.

Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level

Index, the instrument technology:

1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.

2, the Bunsen burner diameter: 9.5mm ± 0.3mm

3, the Bunsen burner tilting in the range of 0-450

4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale

5, the sample holder maximum finger thickness: ≤ 13mm

6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm

7, the sample holder horizontal distance adjustment: ≤ 70mm

8, the level of the sample holder can be 900 and

9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas

Two, the plastic sample index:

1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;

2, the combustion test space of more than 0.5 cubic meters;

3, the burner automatic timing and positioning;

4, the flame time: 0 ~ 99.99 seconds set arbitrarily;

5, flaming, flameless combustion time are recorded automatically, digital display;

6, the flame height can be adjusted, and configure a flame temperature measuring device;

7, with a combustible gas leakage alarm device;

8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;

Three: technical standard:

The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.

The main purpose of this instrument, four:

Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.

Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.

Principle five, the instrument:

One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.

Six, as long as the terms:

1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.

2, Yu Yan: afterflame time duration.

3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.

4, the afterglow time: afterglow duration.

Additional introduction about the instrument:

What is the vertical combustion method? （horizontal burning test）

Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.

Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）

Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）

Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.

Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.

Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level

Index, the instrument technology:

1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.

2, the Bunsen burner diameter: 9.5mm ± 0.3mm

3, the Bunsen burner tilting in the range of 0-450

4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale

5, the sample holder maximum finger thickness: ≤ 13mm

6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm

7, the sample holder horizontal distance adjustment: ≤ 70mm

8, the level of the sample holder can be 900 and

9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas

Two, the plastic sample index:

1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;

2, the combustion test space of more than 0.5 cubic meters;

3, the burner automatic timing and positioning;

4, the flame time: 0 ~ 99.99 seconds set arbitrarily;

5, flaming, flameless combustion time are recorded automatically, digital display;

6, the flame height can be adjusted, and configure a flame temperature measuring device;

7, with a combustible gas leakage alarm device;

8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;

Three: technical standard:

The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.

The main purpose of this instrument, four:

Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.

Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.

Principle five, the instrument:

One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.

Six, as long as the terms:

1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.

2, Yu Yan: afterflame time duration.

3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.

4, the afterglow time: afterglow duration.

Additional introduction about the instrument:

What is the vertical combustion method? （horizontal burning test）

Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.

Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）

Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）

Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.

Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.

Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level

Index, the instrument technology:

1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.

2, the Bunsen burner diameter: 9.5mm ± 0.3mm

3, the Bunsen burner tilting in the range of 0-450

4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale

5, the sample holder maximum finger thickness: ≤ 13mm

6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm

7, the sample holder horizontal distance adjustment: ≤ 70mm

8, the level of the sample holder can be 900 and

9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas

Two, the plastic sample index:

1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;

2, the combustion test space of more than 0.5 cubic meters;

3, the burner automatic timing and positioning;

4, the flame time: 0 ~ 99.99 seconds set arbitrarily;

5, flaming, flameless combustion time are recorded automatically, digital display;

6, the flame height can be adjusted, and configure a flame temperature measuring device;

7, with a combustible gas leakage alarm device;

8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;

Three: technical standard:

The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.

The main purpose of this instrument, four:

Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.

Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.

Principle five, the instrument:

One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.

Six, as long as the terms:

1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.

2, Yu Yan: afterflame time duration.

3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.

4, the afterglow time: afterglow duration.

Additional introduction about the instrument:

What is the vertical combustion method? （horizontal burning test）

Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.

Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）

Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）

Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.

Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.

Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level

Index, the instrument technology:

1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.

2, the Bunsen burner diameter: 9.5mm ± 0.3mm

3, the Bunsen burner tilting in the range of 0-450

4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale

5, the sample holder maximum finger thickness: ≤ 13mm

6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm

7, the sample holder horizontal distance adjustment: ≤ 70mm

8, the level of the sample holder can be 900 and

9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas

Two, the plastic sample index:

1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;

2, the combustion test space of more than 0.5 cubic meters;

3, the burner automatic timing and positioning;

4, the flame time: 0 ~ 99.99 seconds set arbitrarily;

5, flaming, flameless combustion time are recorded automatically, digital display;

6, the flame height can be adjusted, and configure a flame temperature measuring device;

7, with a combustible gas leakage alarm device;

8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;

Three: technical standard:

The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.

The main purpose of this instrument, four:

Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.

Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.

Principle five, the instrument:

One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.

Six, as long as the terms:

1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.

2, Yu Yan: afterflame time duration.

3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.

4, the afterglow time: afterglow duration.

Additional introduction about the instrument:

What is the vertical combustion method? （horizontal burning test）

Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.

Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）

Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）

Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.

Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.

Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level

Index, the instrument technology: